Aircraft Power & Signal
1900 SIM Connectors
Derived from the legacy 1977 connector shells, the 1900SIM series can be fitted with the whole SIM modules range and is perfect for railway and mass transit applications.
AlumaLite
100% Aluminum up to 50% weight saving. Offers superior EMI performance vs other light weight backshells.
BACS16 Qualified Relay Sockets
Amphenol PCD manufactures relay sockets meeting Boeing BACS16 specifications
Bandlock Adapter
Bandlock adapters are a cost-effective means for terminating the cable assembly using replaceable tempered bands with low DC resistance.
Composite
Provide strain relief, support weight saving initiatives and withstands high vibration and corrosive environments.
Crimp Ring Adapter
Cable terminations where heat shrink boots are used may require provision for terminating the screens.
D38999/33 & D38999/32
Protects the connector interface, provides environmental sealing when connector is not in use. Mates with MIL-DTL-38999 Series III connectors.
Ground Blocks – BACC50
For signal and low current distribution, where sealing, space and weight-saving are required. BACC50 Qualified.
High Speed Luminus & Pegasus
High data rate capability such as ethernet or USB via discrete contacts or fiber optic.
Industrial/Audio Relay Sockets
A low-cost, high-quality solution to maximize the life cycle of existing product architectures
Lamp Thread Adapter
An adapter with threads similar to that in the lamp base for shield termination.
Luminus
Small, lightweight, sealed, cost-effective, highly reliable and easy to use circular connectors.
M12883 Qualified Relay Sockets
Amphenol PCD offers the industry’s broadest line of pluggable relay sockets for commercial and military airborne, ground, and shipboard equipment.
M83723/59-1 & M83723/60-1
Protects the connector interface, provides seal when connector is not in use. Mates with MIL-DTL-83723 Series III connectors.
M83723/59-2 & M83723/60-2
Protects the connector interface, provides seal when connector is not in use. Mates with MIL-DTL-83723 Series III connectors.
MS27501 & MS27502
Protects the connector interface, provides seal when connector is not in use. Mates with MIL-DTL-38999 Series I connectors.
MS27510 & MS27511
Protects the connector interface, provides seal when connector is not in use. Mates with MIL-DTL-38999 Series II connectors.
MS3180 & MS3181
Protects the connector interface, provides seal when connector is not in use. Mates with MIL-DTL-26482 connectors.
Nano Pegasus
Small, composite, easy-to-use connector designed for sensing, command and control applications where a Micro or Nano Dsub would be used.
Pegasus
Builds on the successful Luminus connector with the addition of metal plated EMI/RFI shielding.
Quick Mount Relay Sockets
JRS/JRE Quick-Mount Relay Sockets eliminate risk of loose mounting hardware and provide for quick installation- saving weight, time and cost.
Ruggedized Ethernet Cables
Ethernet Cat5e, Cat6, Cat6A & Cat7 cordsets or reels for harsh environments
SIM EN4165 Mono-Module Connectors
The EN4165 / SIM Monomodule Series (ARINC 809) connector is a mono modular, push-pull connector that is ideal for In-Flight Entertainment Systems, Cabin Service Systems, and other interconnect system requirements.
SIM Modules
SIM/EN4165 Series 2 & 3 modules are modular, rectangular connectors that can host a large variety of contacts and fiber optics.
SIM Multibay
2 Bay and 4 Bay SIM/EN4165 plugs and receptacles, designed with weight and space savings in mind.
SIM Plates/Custom Military
Custom connectors according to your needs and dedicated to your applications.
SIM Splices
The SIM Splice is a modular splice that allows reliable, quick, and sealed connection between two embedded SIM modules.
Series I Inline Splices/Electronic Splices
Supplied with a wide variety of diodes, resistors, capacitors, and fuses and allow customers to incorporate system modifications into a wire bundle.
Series I Lightweight Ground Modules
A two-hole flange mount provides a convenient footprint for mounting on airframe or vehicle frames with up to 20 contacts in less than 1 square inch.
Series I Track
Mouting track for Series 1 junction modules. Holds feedback and feedthrough modules, from 2 to 28 positions.
Series II Inline Splices/Electronic Splices
Supplied with a wide variety of diodes, resistors, capacitors, and fuses and allow customers to incorporate system modifications into a wire bundle.
Series II Lightweight Ground Modules
Socket Ground Modules mount directly to a ground plane or ground lug, creating a multi-wire sealed grounding device.
Shrink Boot Adapter
Ideal solution when the undsheilded cables are terminated with heat shrink boots.
Velok
Small, lightweight, easy to use rectangular connector designed for low and medium power applications. Ideal for limited space access.