UAV
Unmanned vehicles, from unmanned aerial vehicles (UAVs), unmanned ground vehicles (UGVs), unmanned surface vehicles (USVs), and unmanned underwater vehicles (UUVs), are poised to conquer domains across land, air, and sea sooner rather than later. Amphenol connectors have the versatility to meet the requirements of unmanned applications operating in any space.
1900 SIM Connectors
Derived from the legacy 1977 connector shells, the 1900SIM series can be fitted with the whole SIM modules range and is perfect for railway and mass transit applications.
75P Clamps
A 1-for-1 replacement for AS2919 metal clamps. Featuring a locking feature, butterfly stacking, weight savings, durable PEEK polymer band material and slip on cushions
86P Clamps
A 1-for-1 replacement for AS2919 metal clamps. Featuring separate locking and mounting locations and a bottom hinge for easy wire bundle installation
Adhesive Snap ‘N Post
Improved installation time with pre-mounted posts on the structure and pre-mounted adapter heads on the wire harness. Simply “snap” adapter heads onto post to complete install.
Adhesive Standoff
An elevated mounted attachment without adding holes in the structure, adhered using wet processes epoxy.
Adhesive Tie Mounts
A low profile mount without adding holes to a structure, adhered using VHB Tape or wet processes epoxy.
AlumaLite
100% Aluminum up to 50% weight saving. Offers superior EMI performance vs other light weight backshells.
Bandlock Adapter
Bandlock adapters are a cost-effective means for terminating the cable assembly using replaceable tempered bands with low DC resistance.
CC1339
Lightest clamp option. Can be pre-mounted while flexible closure allows for wider range of cable harnesses to be attached.
CC5516A Series
Replace metal clamps with reduced weight and installation time. Designed for greater wire protection with the overmolded silicone and non-corrosive, non-conductive PEEK plastic.
CC5516B Series
Replace traditional AS21919 metal clamps with Amphenol’s lightest closed clamp option. Save installation time thanks to high performance plastic and greater wire protection with over-molded silicone along with a secure pre-locking capability.
Cable Adapters, Pigtails, Accessories
Accessory products enabling turn-key integration of virtually any connector onto a cable assembly.
Cable Supports
Customizable Cable Supports made from nylon, designed to fix onto an aircraft’s airframe, fuel tank or engine applications.
Composite
Provide strain relief, support weight saving initiatives and withstands high vibration and corrosive environments.
Conduits
Customizable solution supporting wire bundles where separation or protection from other systems or structures is necessary.
Customizable Fairlead Blocks
Customizable solution ensuring pipes and tubes are properly secured throughout their entire length.
Cyber Security Caps (CapLock & PlugLock)
Rugged composite locking system which prevents a cap from being uncapped or a plug from being unmated from its receptacle.
Design Services
Customize any solution using PCD’s in-house FEA and additive manufactured prototyping to accelerate iterative design cycles and concept validation.
Double Harness Support
A single piece, lightweight design with multiple fixing points to make wire bundle installation and maintenance easy.
Ethernet Military Switches
Rugged military network switches are available in both managed and unmanaged versions in highly customizable options.
Grommet Nut
Provide a good holding force for a crimp connector when expensive and heavy backshells are not used.
Ground Blocks – BACC50
For signal and low current distribution, where sealing, space and weight-saving are required. BACC50 Qualified.
HDMI FTV
HDMIFTV series is a ruggedized display solution that allows you to insert a standard HDMI cordset into a ruggedized, size 17 38999 shell.
Hat Supports – Side
A single piece, lightweight design with multiple fixing points to make wire bundle installation and maintenance easy. Engineered for wire runs parallel to mounting positions.
Hat Supports – Single
A single piece, lightweight design with multiple fixing points to make wire bundle installation and maintenance easy.
Hat Supports -Double
Lightweight design with multiple fixing points to make wire bundle installation and maintenance easy. Engineered for mounting positions on parallel sides.
High Speed Luminus & Pegasus
High data rate capability such as ethernet or USB via discrete contacts or fiber optic.
LDG P-Clamps
Using a softer rubber for clamp cushioning, reduces wear and tear on mission critical cable harnesses without compromising strength and performance.
Luminus
Small, lightweight, sealed, cost-effective, highly reliable and easy to use circular connectors.
MDP FTV – Mini DisplayPort
MDPTFV (Mini Displayport) series runs on display port 1.4 protocol (the fastest speed available) and supports 8k UHD and 4k UHD in a rugged, size 13 38999 shell.
MIL-22992 Class L Heavy Duty Power Cables
Connectors and cables designed to meet demands ranging from 40-200 amps.
Nano Pegasus
Small, composite, easy-to-use connector designed for sensing, command and control applications where a Micro or Nano Dsub would be used.
OMEGA Clamps
Replace and outperform traditional Saddle Clamps. Featuring an overmold silicone cushion with PEEK polymer making the clamp non-corrosive and non-conductive while maintaining a high strength to weight ratio.
P-Clamps
Replace and outperform traditional P-Clamps. Featuring an overmold silicone cushion with PEEK polymer making the clamp non-corrosive and non-conductive while maintaining a high strength to weight ratio.
PEEK Standoffs
Designed with strength, stability, and weight reduction in mind to replace heavier metal alternatives.
Pegasus
Builds on the successful Luminus connector with the addition of metal plated EMI/RFI shielding.
Power Feeder Spacers
Provide constant spacing between the power feeder harnesses, allowing for a slight rotation on the power feeder bundle.
Quick Mount Relay Sockets
JRS/JRE Quick-Mount Relay Sockets eliminate risk of loose mounting hardware and provide for quick installation- saving weight, time and cost.
QuickSNAP Lightening Hole Bushings
Customizable, made with smooth edges to gently guide wires through aircraft frames and stringers.
RJF / RJFTV Ethernet Connectors (Cat5E, Cat6, Cat6A)
Rugged Ethernet connectors for RJ45 connection that are offered in speeds compatible with Cat5E, Cat6 and Cat6A.
RJF TV ATEX Zone 2
Certified for use in explosive environments. Tested at 500V during 1 minute without sparking.
Rapid Part Development
Ability to rapidly design and deploy production ready parts using 3D printing technology.
Rugged Media Converters
Customizable rugged media converters, from fiber to copper or from copper to fiber.
Rugged USB-A
Rugged USB connectors for harsh environments, offered in both USB2.0 and USB3.0 speeds.
Ruggedized Ethernet Cables
Ethernet Cat5e, Cat6, Cat6A & Cat7 cordsets or reels for harsh environments
SIM EN4165 Mono-Module Connectors
The EN4165 / SIM Monomodule Series (ARINC 809) connector is a mono modular, push-pull connector that is ideal for In-Flight Entertainment Systems, Cabin Service Systems, and other interconnect system requirements.
SIM Modules
SIM/EN4165 Series 2 & 3 modules are modular, rectangular connectors that can host a large variety of contacts and fiber optics.
SIM Multibay
2 Bay and 4 Bay SIM/EN4165 plugs and receptacles, designed with weight and space savings in mind.
SIM Plates/Custom Military
Custom connectors according to your needs and dedicated to your applications.
SIM Splices
The SIM Splice is a modular splice that allows reliable, quick, and sealed connection between two embedded SIM modules.
Series I Inline Splices/Electronic Splices
Supplied with a wide variety of diodes, resistors, capacitors, and fuses and allow customers to incorporate system modifications into a wire bundle.
Series I Track
Mouting track for Series 1 junction modules. Holds feedback and feedthrough modules, from 2 to 28 positions.
Series II Inline Splices/Electronic Splices
Supplied with a wide variety of diodes, resistors, capacitors, and fuses and allow customers to incorporate system modifications into a wire bundle.
Series II Lightweight Ground Modules
Socket Ground Modules mount directly to a ground plane or ground lug, creating a multi-wire sealed grounding device.
Shrink Boot Adapter
Ideal solution when the undsheilded cables are terminated with heat shrink boots.
Single Harness Support
A single piece, lightweight design with multiple fixing points to make wire bundle installation and maintenance easy.
TV µCom USB 3.0
TVμCom USB3.0 is the smallest interface that can run USB3.0 signal inserted into a size 11 38999 series III shell.
TV µCom-10Gb+ Series
TVμCom is a miniature, high-speed rugged connector where the μCom interface is inserted as a contact into a size 11 38999 series III shell. Exceeds Cat6A and Cat7 performance operating speeds.
Tie Down Strip
A low-profile lightweight design with multiple fixing points to make wire bundle installation and maintenance easy.
U-Snap Clamps
A lightweight, metal free clamp with an interchangeable grommet. Available in adhesive and screw mount.
Velok
Small, lightweight, easy to use rectangular connector designed for low and medium power applications. Ideal for limited space access.
Wire Separators
Separate cable harnesses from one another, organizing cable routing throughout the aircraft.
µCom USB 3.0
Smallest interface that can run USB3.0 signal while still being as rugged as a 38999 connector.
µCom-10Gb+ Series
μCom is a miniature, high-speed rugged connector series. Exceeds Cat6A and Cat7 performance operating speeds and IP68 when mated.