Helicopters

1900 SIM Connectors

Derived from the legacy 1977 connector shells, the 1900SIM series can be fitted with the whole SIM modules range and is perfect for railway and mass transit applications.

2M Micro-Miniature Assemblies

Finished, turnkey, molded cable assemblies

75P Clamps

A 1-for-1 replacement for AS2919 metal clamps. Featuring a locking feature, butterfly stacking, weight savings, durable PEEK polymer band material and slip on cushions

86P Clamps

A 1-for-1 replacement for AS2919 metal clamps. Featuring separate locking and mounting locations and a bottom hinge for easy wire bundle installation

Adhesive Snap ‘N Post

Improved installation time with pre-mounted posts on the structure and pre-mounted adapter heads on the wire harness. Simply “snap” adapter heads onto post to complete install.

Adhesive Standoff

An elevated mounted attachment without adding holes in the structure, adhered using wet processes epoxy.

Adhesive Tie Mounts

A low profile mount without adding holes to a structure, adhered using VHB Tape or wet processes epoxy.

AlumaLite

100% Aluminum up to 50% weight saving. Offers superior EMI performance vs other light weight backshells.

Bandlock Adapter

Bandlock adapters are a cost-effective means for terminating the cable assembly using replaceable tempered bands with low DC resistance.

CC1339

Lightest clamp option. Can be pre-mounted while flexible closure allows for wider range of cable harnesses to be attached.

 

CC5516A Series

Replace metal clamps with reduced weight and installation time. Designed for greater wire protection with the overmolded silicone and non-corrosive, non-conductive PEEK plastic.

CC5516B Series

Replace traditional AS21919 metal clamps with Amphenol’s lightest closed clamp option. Save installation time thanks to high performance plastic and greater wire protection with over-molded silicone along with a secure pre-locking capability.

Cable Supports

Customizable Cable Supports made from nylon, designed to fix onto an aircraft’s airframe, fuel tank or engine applications.

Composite

Provide strain relief, support weight saving initiatives and withstands high vibration and corrosive environments.

Conduits

Customizable solution supporting wire bundles where separation or protection from other systems or structures is necessary.

Crimp Ring Adapter

Cable terminations where heat shrink boots are used may require provision for terminating the screens.

Custom Molded Cables

High performance injection-molded cables.

Customizable Fairlead Blocks

Customizable solution ensuring pipes and tubes are properly secured throughout their entire length.

Design Services

Customize any solution using PCD’s in-house FEA and additive manufactured prototyping to accelerate iterative design cycles and concept validation.

Double Harness Support

A single piece, lightweight design with multiple fixing points to make wire bundle installation and maintenance easy.

Engine

Qualified to Aerospace Defense Security Standard ESC 75, 76, 77.  Available in Straight, 45° and 90° options.

Grommet Nut

Provide a good holding force for a crimp connector when expensive and heavy backshells are not used.

Ground Blocks – BACC50

For signal and low current distribution, where sealing, space and weight-saving are required. BACC50 Qualified.

Hat Supports – Side

A single piece, lightweight design with multiple fixing points to make wire bundle installation and maintenance easy. Engineered for wire runs parallel to mounting positions.

Hat Supports – Single

A single piece, lightweight design with multiple fixing points to make wire bundle installation and maintenance easy.

Hat Supports -Double

Lightweight design with multiple fixing points to make wire bundle installation and maintenance easy. Engineered for mounting positions on parallel sides.

Industrial/Audio Relay Sockets

A low-cost, high-quality solution to maximize the life cycle of existing product architectures

Lamp Thread Adapter

An adapter with threads similar to that in the lamp base for shield termination.

Luminus

Small, lightweight, sealed, cost-effective, highly reliable and easy to use circular connectors.

M12883 Qualified Relay Sockets

Amphenol PCD offers the industry’s broadest line of pluggable relay sockets for commercial and military airborne, ground, and shipboard equipment.

MIL-DTL-38999 Assemblies

Factory assembled, molded MIL-DTL-38999 cables

Metal Flange

Prevents loss of hardware inside the box and easy alignment during assembly.

Nano Pegasus

Small, composite, easy-to-use connector designed for sensing, command and control applications where a Micro or Nano Dsub would be used.

OMEGA Clamps

Replace and outperform traditional Saddle Clamps. Featuring an overmold silicone cushion with PEEK polymer making the clamp non-corrosive and non-conductive while maintaining a high strength to weight ratio.

Over-Braided Cables

Over-braided cables to improve overall EMI performance.

P-Clamps

Replace and outperform traditional P-Clamps. Featuring an overmold silicone cushion with PEEK polymer making the clamp non-corrosive and non-conductive while maintaining a high strength to weight ratio.

PEEK Standoffs

Designed with strength, stability, and weight reduction in mind to replace heavier metal alternatives.

Pegasus

Builds on the successful Luminus connector with the addition of metal plated EMI/RFI shielding.

Power Feeder Spacers

Provide constant spacing between the power feeder harnesses, allowing for a slight rotation on the power feeder bundle.

Pre-Shield Adapter

Provided with a pre-cut braid that is fitted to the adapter for easy assembly.

Quick Mount Relay Sockets

JRS/JRE Quick-Mount Relay Sockets eliminate risk of loose mounting hardware and provide for quick installation- saving weight, time and cost.

QuickSNAP Lightening Hole Bushings

Customizable, made with smooth edges to gently guide wires through aircraft frames and stringers.

Rapid Part Development

Ability to rapidly design and deploy production ready parts using 3D printing technology.

Ruggedized Ethernet Cables

Ethernet Cat5e, Cat6, Cat6A & Cat7 cordsets or reels for harsh environments

SIM EN4165 Mono-Module Connectors

The EN4165 / SIM Monomodule Series (ARINC 809) connector is a mono modular, push-pull connector that is ideal for In-Flight Entertainment Systems, Cabin Service Systems, and other interconnect system requirements.

SIM Modules

SIM/EN4165 Series 2 & 3 modules are modular, rectangular connectors that can host a large variety of contacts and fiber optics.

SIM Multibay

2 Bay and 4 Bay SIM/EN4165 plugs and receptacles, designed with weight and space savings in mind.

SIM Plates/Custom Military

Custom connectors according to your needs and dedicated to your applications.

SIM Splices

The SIM Splice is a modular splice that allows reliable, quick, and sealed connection between two embedded SIM modules.

SQ Adapter

Cost-effective way to terminate the braid to the adapter.

Series I Inline Splices/Electronic Splices

Supplied with a wide variety of diodes, resistors, capacitors, and fuses and allow customers to incorporate system modifications into a wire bundle.

Series I Lightweight Ground Modules

A two-hole flange mount provides a convenient footprint for mounting on airframe or vehicle frames with up to 20 contacts in less than 1 square inch.

Series I Terminal Junction Modules

Robust, reliable, and perform to highest standards.

Series I Track

Mouting track for Series 1 junction modules. Holds feedback and feedthrough modules, from 2 to 28 positions.

Series II Inline Splices/Electronic Splices

Supplied with a wide variety of diodes, resistors, capacitors, and fuses and allow customers to incorporate system modifications into a wire bundle.

Series II Lightweight Ground Modules

Socket Ground Modules mount directly to a ground plane or ground lug, creating a multi-wire sealed grounding device.

Series II Socket Junction Modules

Robust, reliable, and perform to highest standards.

Series II Track

Mounting track for Series II modules.

Shrink Boot Adapter

Ideal solution when the undsheilded cables are terminated with heat shrink boots.

Single Harness Support

A single piece, lightweight design with multiple fixing points to make wire bundle installation and maintenance easy.

Tie Down Strip

A low-profile lightweight design with multiple fixing points to make wire bundle installation and maintenance easy.

U-Snap Clamps

A lightweight, metal free clamp with an interchangeable grommet.  Available in adhesive and screw mount.

Velok

Small, lightweight, easy to use rectangular connector designed for low and medium power applications. Ideal for limited space access.

Wire Separators

Separate cable harnesses from one another, organizing cable routing throughout the aircraft.