Avionics & Instrumentation

1900 SIM Connectors

Derived from the legacy 1977 connector shells, the 1900SIM series can be fitted with the whole SIM modules range and is perfect for railway and mass transit applications.

2M Micro-Miniature Assemblies

Finished, turnkey, molded cable assemblies

AlumaLite

100% Aluminum up to 50% weight saving. Offers superior EMI performance vs other light weight backshells.

BACS16 Qualified Relay Sockets

Amphenol PCD manufactures relay sockets meeting Boeing BACS16 specifications

Bandlock Adapter

Bandlock adapters are a cost-effective means for terminating the cable assembly using replaceable tempered bands with low DC resistance.

Composite

Provide strain relief, support weight saving initiatives and withstands high vibration and corrosive environments.

Crimp Ring Adapter

Cable terminations where heat shrink boots are used may require provision for terminating the screens.

Custom Molded Cables

High performance injection-molded cables.

D38999/33 & D38999/32

Protects the connector interface, provides environmental sealing when connector is not in use. Mates with MIL-DTL-38999 Series III connectors.

Grommet Nut

Provide a good holding force for a crimp connector when expensive and heavy backshells are not used.

Ground Blocks – BACC50

For signal and low current distribution, where sealing, space and weight-saving are required. BACC50 Qualified.

High Speed Luminus & Pegasus

High data rate capability such as ethernet or USB via discrete contacts or fiber optic.

Industrial/Audio Relay Sockets

A low-cost, high-quality solution to maximize the life cycle of existing product architectures

Lamp Thread Adapter

An adapter with threads similar to that in the lamp base for shield termination.

Luminus

Small, lightweight, sealed, cost-effective, highly reliable and easy to use circular connectors.

M12883 Qualified Relay Sockets

Amphenol PCD offers the industry’s broadest line of pluggable relay sockets for commercial and military airborne, ground, and shipboard equipment.

M83723/59-1 & M83723/60-1

Protects the connector interface, provides seal when connector is not in use. Mates with MIL-DTL-83723 Series III connectors.

M83723/59-2 & M83723/60-2

Protects the connector interface, provides seal when connector is not in use. Mates with MIL-DTL-83723 Series III connectors.

MIL-DTL-38999 Assemblies

Factory assembled, molded MIL-DTL-38999 cables

MS27501 & MS27502

Protects the connector interface, provides seal when connector is not in use. Mates with MIL-DTL-38999 Series I connectors.

MS27510 & MS27511

Protects the connector interface, provides seal when connector is not in use. Mates with MIL-DTL-38999 Series II connectors.

MS3180 & MS3181

Protects the connector interface, provides seal when connector is not in use. Mates with MIL-DTL-26482 connectors.

Metal Flange

Prevents loss of hardware inside the box and easy alignment during assembly.

Nano Pegasus

Small, composite, easy-to-use connector designed for sensing, command and control applications where a Micro or Nano Dsub would be used.

Over-Braided Cables

Over-braided cables to improve overall EMI performance.

Pegasus

Builds on the successful Luminus connector with the addition of metal plated EMI/RFI shielding.

Pre-Shield Adapter

Provided with a pre-cut braid that is fitted to the adapter for easy assembly.

Quick Mount Relay Sockets

JRS/JRE Quick-Mount Relay Sockets eliminate risk of loose mounting hardware and provide for quick installation- saving weight, time and cost.

Ruggedized Ethernet Cables

Ethernet Cat5e, Cat6, Cat6A & Cat7 cordsets or reels for harsh environments

SIM EN4165 Mono-Module Connectors

The EN4165 / SIM Monomodule Series (ARINC 809) connector is a mono modular, push-pull connector that is ideal for In-Flight Entertainment Systems, Cabin Service Systems, and other interconnect system requirements.

SIM Modules

SIM/EN4165 Series 2 & 3 modules are modular, rectangular connectors that can host a large variety of contacts and fiber optics.

SIM Multibay

2 Bay and 4 Bay SIM/EN4165 plugs and receptacles, designed with weight and space savings in mind.

SIM Plates/Custom Military

Custom connectors according to your needs and dedicated to your applications.

SQ Adapter

Cost-effective way to terminate the braid to the adapter.

Series I Inline Splices/Electronic Splices

Supplied with a wide variety of diodes, resistors, capacitors, and fuses and allow customers to incorporate system modifications into a wire bundle.

Series I Lightweight Ground Modules

A two-hole flange mount provides a convenient footprint for mounting on airframe or vehicle frames with up to 20 contacts in less than 1 square inch.

Series I Terminal Junction Modules

Robust, reliable, and perform to highest standards.

Series I Track

Mouting track for Series 1 junction modules. Holds feedback and feedthrough modules, from 2 to 28 positions.

Series II Inline Splices/Electronic Splices

Supplied with a wide variety of diodes, resistors, capacitors, and fuses and allow customers to incorporate system modifications into a wire bundle.

Series II Lightweight Ground Modules

Socket Ground Modules mount directly to a ground plane or ground lug, creating a multi-wire sealed grounding device.

Series II Socket Junction Modules

Robust, reliable, and perform to highest standards.

Series II Track

Mounting track for Series II modules.

Shrink Boot Adapter

Ideal solution when the undsheilded cables are terminated with heat shrink boots.

Solaris

Small, lightweight, sealed, highly reliable and easy to use rectangular connectors.

Strain Relief Clamp

Light weight clamp used for securing cable into a desired direction.

Tie Wrap

Light weight clamp used for securing cable into a desired direction.