.200" ELD Cage-Clamp/Edgecard Connector

5.08 mm/0.200 in
Product Type: 
Edge Card Terminal Block
Terminal Block Image: 
Line Drawing: 
Catalog Table Chart: 

The .200" ELD wire-to-board edgecard terminal block features selectively gold-plated cantilever beam board contacts and a moving cage clamp wire termination.
Wires are installed in line with the plane of the board and contact, and can be trained in any direction.

Superior Contact Design
Key to the superior performance of the ELD is a unique cantilever beam contact that eliminates the board damage possible with the stamped tuning fork board contacts commonly used in similar connectors. The dual cantilever beam also assures improved performance under board warping and bending conditions over the full .054" to .070" board thickness range.
Moving cage clamp contacts provide direct, high pressure wire termination without strand damage.
Connectors are available with special marking and configuration adaptations, and in sizes not indicated in the table. Please contact Amphenol Pcd for details.

Current Rating: 10A
Insulation Resistance: >105 Megohms
Wire Range: 14-26 AWG
Wire Pullout Force: Per UL 486
Board Thickness Range: .054-.070"

Housing: Glass-filled polyester, UL 94-V0, Black
Contact: Phosphor bronze, .000030" selective gold finish
Wire Clamp: Brass, nickel finish
Terminal Screw: Steel, nickel finish